|Supply Ability:||200 Set/Sets per Month|
|Payment Terms:||D/P,T/T,Western Union,VISA|
Using new casting process has good
Use integral patent prism structure,
excellence performance of optical.
Smooth flat for light emitting with high
efficiency, no deposits of rain above the prism.
Serious design, use different kinds of
flitter and lamps could meet the requirements
of several different types of lights.
The same series of lamp parts are easily
interchangeable; effectively reduce the
cost of production.
Smooth lamp cover without sharp edges,
better protection of aircraft tire.
Large area of the radiating ribs around the
whole outer surface has good heat dissipation
performance of the light fixture.
Shock-proof design for integral Bulb holder can
effectively prolong the service life of bulb.
Reasonable parts positioning design, no need
calibration for replacing the prism, optical
components such as filters or bulb.
Special process of anodic oxidation Lighting
surface using a, wear resistance, corrosion resistance.
Lights equipped with special remove tool,
convenience installation and replacem
1. Upper cover
2. Upper cover sealing ring
3. Prism sealing rubber sleeve
5. Prism gasket
6. Prism platen
8. Bulb holder
10. Mounting plate
11. Inner cover
12. Wiring post
13. Side sealing strip
14. A6 plug
15. Spiracle core