|Supply Ability:||100 Ton/Tons per Month|
|1.Material||Malleable Iron,Q235,Carbon steel,stainless steel|
|2.Size||1/8 inch to 3 inch|
|3.Model Number||Malleable Wire Rope Clip|
|4.Technology||Casting and Forging|
Electric galvanized, color painting or self color.
Hot dip galvanized
|6.Drawings or samples||Processing/OEM/ODM service provided.|
Drawings→ mould making → preforging →rough machining
or finish machining →surface treatment →product checking
and quality control→ packing →delivery
|8.Samples||We can supply the free samples within 3 days.|
Put in gunny bags or cartons and then put on
the pallets or as the requirements of the customers.
|10.Term Payment||30% deposite, another 70% paid after faxing the copy of BL;|
|Step 1. Refer to Table 1 (below left) in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope – live end rests in saddle (Never saddle a dead horse!) Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.|
|Step 2. When two clips are required, apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to Step 3.|
|Step 3. When three or more clips are required, space additional clips equally between first two - take up rope slack - tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.|
|Figure 4. If a pulley (Sheave) is used, in place of a thimble add one additional clip. Clip spacing should be as shown.|
|Wire Rope Splicing Procedures:|
|Figure 5. The preferred method of splicing two wire ropes together is to use interlocking turnback eyes with himbles, using the recommended number of clips on each eye (See Figure 1).|
|Figure 6. An alternate method is to use twice the number of clips as used for a turnback termination. The rope ends are placed parallel to each other, overlapping by twice the turnback amount shown in the application instructions. The minimum number of clips should be installed on each dead end (See
1. Are you a factory?
Yes, we are a factory which was founded in 1996.
We focus on metal forging and stamping, have 4 production lines with advanced machines over 100 set. Also We have been in good partnership with casting factory, good quality malleable rigging products could be provided.
2. Can you provide the free samples?
Yes, the samples are free, but the freight is on your side.
3. What are your advantages compared with others?
With our own factory to manufacture the products, we can ensure timely products delivery, trustworthy quality and favorable price, that is our advantage.
4. How do you control quality?
With ISO 9001-2008 quality Management System, we control the quality from selecting good material, producing follow the standard, proper inspection of products.